Safety transformer for pool lights – 100 W (230V/12V)
 This safety transformer with a power of 100 W is intended to supply the pool lighting that works at a low voltage of 12 V. It enables a safe reduction of the voltage from 230 V to 12 V, ensuring stable operation and long life of the lighting.
 Technical features:

 
 Rated power: 100 W
 
 Input voltage: 230 V
 
 Output voltage: 12 V
 
 Maximum permissible ambient temperature: 40 °C
 
 Protection: Built-in glass fuse (0.8 A) against short circuit

 Suitability for LED pool lighting
 This transformer is suitable for powering LED pool lights with a total power of up to 100 W. Thanks to the energy efficiency of LED technology, it is recommended to use it with:

 
 LED lamps with a power of 10 W to 80 W , to ensure optimal power distribution and long lamp life.
 
 Multiple lower-power LED lights, for example 4 × 20 W or 10 × 10 W , provided that the total consumption does not exceed 100 W.
 
 LED lighting that supports 12 V operating voltage, including single-color and RGB lights.

 Important notes for installation:

 
 The transformer may only be installed and maintained by an authorized professional.
 
 All work on the transformer may only be performed when it is disconnected from the power supply.
 
 It is necessary to ensure adequate ventilation of the space in which it is installed.
 
 The distance between the transformer and the lighting fixture must not be less than 30 cm.
 
 The transformer is intended for fixed installation with a permanent connection.
 
 Cable connections should be properly sealed to prevent moisture from entering.
 
 The secondary circuit must not be connected to other electrical circuits.
 
 The screws on the connection terminals must be firmly tightened and checked regularly.

 This transformer provides reliable and safe power to pool LED lighting , stabilizing the voltage and isolating oscillations that could affect the operation and lifespan of the light.