The Preva 75 pump is a self-priming pump designed for medium-sized private pools , with a flow rate of 12 m³/h, recommended for pools up to 60 m³.

 
 Each piece is tested (it has its own record sheet with measured technical data on the last page of the instructions for use)
 
 The pump body and diffuser made of glass fiber reinforced polypropylene significantly extend the service life.
 
 Transparent polycarbonate cover for easy inspection of the pre-filter
 
 Unique conical filter cover sealing system
 
 Two connection options – 1 1/2" internal thread or detachable connection with gluing protrusion D 50 mm
 
 The sealing segment made of carbon ceramic and AISI 316 stainless steel is located in the turbine in a bronze inner coating
 
 The pump axis is not in contact with the pumped water
 
 Motor bearings with lifetime lubrication for long service life and quiet operation
 
 Lower engine start temperature
 
 Two types of motors – 0.5 HP for model 25, 33, 50 and 1 HP for model 75 and 100 (input power is determined by turbine power)
 
 Preva pumps can be used for salt water


 Technical parameters

 

  

   
 Product type:
   
 Filter pump
  
  

   
 Body material:
   
 Polypropylene reinforced with glass fibers
  
  

   
 Sealing segment material:
   
 Carbon ceramic and stainless steel AISI316
  
  

   
 Motor protection:
   
 IP55
  
  

   
 Force:
   
 0.55 kW
  
  

   
 Input current:
   
 3.8 A
  
  

   
 Turns:
   
 2850 revolutions per minute
  
  

   
 Flow:
   
 12 m3/h
  
  

   
 Electricity consumption:
   
 0.80 kW
  
  

   
 Voltage:
   
 230V
  
  

   
 Motor bearings with lifetime lubrication:
   
 that
  
  

   
 Suction/discharge connection - gluing:
   
 50 mm
  
  

   
 Suction/discharge connection - thread:
   
 1 1/2 inches
  
  

   
 Noise level:
   
 70 dB
  
  

   
 Self-priming:
   
 that
  
  

   
 Every piece is tested:
   
 that
  
  

   
 Shaft in contact with water:
   
 Not
  
  

   
 Turbine material:
   
 Polypropylene with glass fibers and brass injection
  
  

   
 Max. working pressure:
   
 2.5 bar
  
  

   
 Pre-filter:
   
 that
  
  

   
 For salt water up to 5 g/l (<0.5%):
   
 that
  
  

   

   

  
 


 Technical specifications Detailed product data