- The Preva 100 pump is a self-priming pump designed for medium-sized private pools, with a flow rate of 16 m³/h, recommended for pools up to 80 m³.
- Each piece is tested (it has its own registration sheet with measured technical data on the back of the instructions)
- Pump body and diffuser made of glass-fiber reinforced polypropylene provide superior durability
- Transparent polycarbonate cover for easy inspection of the pre-filter
- Unique conical pre-filter cover sealing system
- Two connection options – 1 1/2" internal thread or detachable connection with gluing hole D 50 mm
- The sealing segment made of carbon ceramic and AISI 316 stainless steel is mounted in the turbine on a bronze injection
- The pump shaft is not in contact with the pumped water.
- Motor bearings with lifetime lubrication for long life and quiet operation
- Lower engine operating temperature
- Two types of engines – 0.5 hp for the 25, 33, 50 and 1 hp for the 75 and 100 models.
- Preva pumps can be used for salt water.
Technical parameters
| Product type: | Filter pump |
|---|---|
| Body material: | Polypropylene reinforced with glass fibers |
| Sealing segment material: | Carbon ceramic and stainless steel AISI316 |
| Engine cover: | IP55 |
| Performance: | 0.75 kW |
| Output current: | 4.2A |
| Speed: | 2850 revolutions per minute |
| Flow: | 16 m3/h |
| Energy consumption: | 1.06 watts |
| Voltage: | 230V |
| Motor bearings with lifetime lubrication: | That |
| Suction/discharge connection - connection: | 50 mm |
| Inlet/outlet connection - thread: | 1 1/2" inches |
| Noise level: | 70 dB |
| Self-priming: | That |
| Every piece tested: | That |
| Shaft in contact with water: | Not |
| Turbine material: | Polypropylene with glass fibers and brass injection |
| Max. working pressure: | 2.5 bar |
| Pre-filter: | That |
| For salt water up to 5 g/l (<0.5%): | That |
Pump Preva 100 16m³/h 230V
€394.00Price

